Closed-loop stepping motor PULSERVO II

PULSERVO II is a stepping motor system eliminating "out-of-step" a weak point of open-loop while with advantage of a stepping motor. PLS2-EC series uses EtherCAT interface and controlled by Motion Control Profile CiA402 Drive Profile as follows: CSP(Cyclic Synchronous Position) Mode / PP(Profile position) Mode / HM(Homing) Mode

It supports EtherCAT time synchronization mode, Free run, SM Event, DC SYNC Event, and is controlled at high speed, cycle time 250μs(min) particularly in DC SYNC Event

Features

  • EtherCAT
    • Communication protocol: CoE (CAN application protocol over EtherCAT) FoE (File Access over EtherCAT)
    • Control Profile: CiA402 Drive Profile
    • Operation Mode: CSP(Cyclic Synchronous Position) Mode / PP(Profile position) Mode / HM(Homing) Mode
    • Synchronous Mode: Free Run/SM Event/DC SYNC Event(250μs or more)
  • Closed-loop stepping motor system
    Position-detecting encoder confirms the current position, and closed-loop function corrects/controls the position deviation.
  • High resolution
    Using an encoder for detecting position: 20mm square:4,000p/r, 28mm square:16,000p/r, 42,56, 60mm square:10,000p/r or 20,000p/r, the resolution can be set in 6 to 10 levels.
  • Optimum current
    Larger torque than conventional stepping motors can be generated by current optimization for the load. Also, the heat generated by motor/driver is suppressed for energy saving.
  • High-speed positioning for short strokes
    The torque at stopping is the highest, and larger torque can be obtained at starting with a stepping motor. In addition, "Low vibration operation" function is effective for high-speed repetitive positioning of short strokes.
  • Push operation
    Two modes are available: to stop pushing when the set torque is reached(Stop Mode) and to keep pressing at set torque(Non-Stop Mode). In addtion, homing operation can be done by Push operation using Stop Mode.
  • Safety function: Torque Off
    Motor excitation OFF by torque off signal(TQOFF). It prevents unintended operation during maintenance work for safety

 

Closed-loop stepping motor PULSERVO II

Company

Nippon Pulse Motor (NPM)

Nippon Pulse Motor Co., Ltd.