Renesas Industrial Network Engine: R-IN32M3 Evaluation Board
The R-IN32M3 series of industrial Ethernet controllers is designed to support a broad range of industrial Ethernet protocols. Optimized integration options, emphasis on low power design and a high level of integration make it a very powerful, compact, power optimized device with a low overall bill of material cost. Smart integration of dedicated hardware accelerators allow to offer significant more processing power for applications than similar CPU designs without such accelerators.
Key features:
- ARM® Cortex™-M3 based CPU subsystem clocked at 100MHz clock
- Hardware offload engines take significant load from the main CPU
- Hardware Real-time OS Accelerator (HW-RTOS)
- Hardware Ethernet Accelerators (IP/TCP/UDP Check Sum, Header ENDEC, Buffer manager)
- 1.3 MByte of on-chip RAM
- 2-port Real-Time Gigabit Switch, supports cut-through and store&forward operating modes as well as IEEE1588 PTP and Device-Level-Ring (DLR) protocols
- EtherCAT Slave Controller (ESC) in hardware
- Other leading fieldbuses on-chip
- Lots of peripherals and GPIOs
- Support for a wide range of Industrial Ethernet protocols
Detailed Product Features:
- High-performance ARM® Cortex™-M3 CPU core
- 100 MHz max. clock frequency
- 768 KByte instruction memory
- 512 KByte data memory
- 64 KByte buffer memory
- Integrated interrupt controller
- Hardware Real-time OS Accelerator (HW-RTOS)
- Ethernet Accelerator
- EtherCAT Slave Controller (ESC)
- 2-port Gigabit Ethernet Switch (cut through and store&forward)
- IEEE1588 V2 (PTP) support
- 2 Industrial Ethernet PHYs
- Serial Flash Interface
- 16/32-bit SRAM interface
- Multi-channel real-time DMA controller
- 2 I2C interfaces
- 2 UART interfaces
- 2 CSI interfaces
- 2 CAN interfaces
- 1 CC-Link interface
- GPIOs
- 25 MHz crystal oscillator
- 4 Timers
- Watchdog timer
- Boundary scan support
- Compact 324-pin BGA package, 19 mm x 19 mm,1 mm ball pitch
- Power supply: 1.0 V (Core), 3.3 V (IO)
- Temperature range TA -40°C to +85°C
