PCI EtherCAT slave card FC1100

The FC1100 PCI EtherCAT card can be used to integrate a PC as a slave in an EtherCAT network. The card has an EtherCAT channel with two ports (IN/OUT) and is also supported in the ET9300 EtherCAT Slave Stack Code. The FC1100 can therefore also be used for the development of EtherCAT slave software on the PC.

Technical data:

  • Fieldbus: EtherCAT (direct mode)
  • EtherCAT plug: 2 x RJ 45, EtherCAT IN/OUT
  • Data transfer rates: 100 Mbit/s
  • Interface to the PC: PCI 32 bit
  • EtherCAT Slave Controller:  ET1100
  • Distributed Clocks: yes (64 bit)
  • RAM: 8 kbyte
  • SYNC manager: 8
  • FMMUs: 8
  • Cable length: up to 100 m
  • Hardware diagnosis: 2 LEDs per channel (activity, link)
  • Dimensions: ca. 65 mm x 125 mm
  • Operating temperature: 0…55 °C
  • Driver:
    • Included with TwinCAT
    • Windows 32 Bit driver in included in the Slave Stack Code download 
    • The required hardware information to implement can be found in the FC11xx Application Note

 

PCI EtherCAT slave card FC1100

公司

BECKHOFF Automation

Beckhoff Automation GmbH & Co. KG